目的 優選廣藿香揮發油β-環糊精包合物制備的高速剪切包合工藝。方法 在單因素考察的基礎上，以收得率、包合率的綜合評分為評價指標，采用G1-熵權法結合星點設計-響應面法，對剪切轉速、剪切時間、β-環糊精與揮發油質量比例進行考察。通過Design-Expert 8.0.6.1軟件分析各因素的交互作用優選最佳工藝參數。結果 采用高速剪切法制備廣藿香揮發油β-環糊精包合物的最佳包合工藝條件為：β-環糊精與揮發油質量比例8∶1，剪切時間3 min，剪切轉速4 200 r/min，β-環糊精與水質量比例1∶7。結論 優化了廣藿香揮發油β-環糊精包合物的高速剪切法制備的最佳工藝參數，為后續相關產品的開發研究和生產提供指導。

Objective To optimize the preparation process of Pogostemon cablin volatile oil β-cyclodextrin inclusion. Methods On the basis of single factor investigation, G1-entropy weight method combined with central composite design and response surface method was used. Shear speed, shear time, and the ratio of β-cyclodextrin to volatile oil were investigated with the comprehensive score of yield rate and inclusion rate as evaluation indexes. The interaction of various factors was analyzed by Design-Expert 8.0.6.1 software, and the optimized preparation process was investigated. Results The optimal inclusion process of high speed shear inclusion process was as follows:the ratio of β-cyclodextrin to volatile oil was 8:1, the shear time was 3 min, the shear speed was 4200 r/min, and the ratio of β-cyclodextrin to water was 1:7. Conclusion The optimized inclusion process of Pogostemon cablin volatile oil β-cyclodextrin inclusion is optimized, and can provide guidance for the development and production of related products in the future.

R284.2

佛山應急科技攻關專項（2020001000206）；佛山市科技創新項目（2120001002309）